List of Graduation, Master's and Doctor's Thesis

@

    Doctor's Thesis

    Master's Thesis

    Graduation Thesis

Go back to the Top Page of FUKUNAGA LAB.


Doctor's Thesis

    2010

         Real-Time Impact Force Identification of Plates and Shells

    2008

        Improvements of Space Debris Protection System of Space Structures

    2007

         Optimal Material Distribution for Improving the Fracture Strength of Functionally Graded Thick Cylinders

    2006

        Stabilization of Numerical Simulation of Damage Propagation in FRP Laminated Structures

        An Efficient Design Approach for Aeroelastic Tailoring and Control of Composite Plate Wings

    2004

        Study of High Accurate Static Shape Control and Vibration Control of Space Structures Based on the Optimal Placement of Sensors and Actuators

Go back to the Top of This Page

Master's Thesis

    2017

          Damage Detection in Stiffened CFRP Laminates Using Lamb Wave

          Determination of Severing Criteria of Tape Tethers in Hypervelocity Impacts of Space Debris

          Semi-Active Vibration Control Using Magnetostrictive Element

          Identification of Distributed Force Acting on CFRP Structure

    2016

          Performance Improvement of Electrical Passive Vibration Absorber by adapting Exact Designing Method of Tuned Mass Damper

          Dynamic Simulation of Flexible Multibody System in Airflow using Absolute Nodal Coordinate Formulation

          Shape-Extraction Method of Debris Cloud from an Image of High-Speed Camera in Space-Debris Impact

          Impact Force Identification of Isogrid Structures Based on Radiated Sound

          Damage Detection in CFRP Laminated Plates Based on the Characteristics of Lamb Wave Propagation

          Dynamic Analysis of Flexible Multibody System with Mass Loss Using Velocity Transformation

          Impact Force Identification and Damage Monitoring of CFRP Sandwich Panels Using Piezoelectric Sensors

          Control Strategy for Amplifying Electrical Energy in Piezoelectric Energy Harvesting

    2015

          Impact Damage Detection in FW Composite Vessel Using Ultrasonic Waves

          Debonding Detection of Composite Structures Based on the Coin Tap Method

          Modeling and Simulation for Vibration-Based Energy Harvesting System using Bond Graph Theory

          Impact Force Identification of Isogrid-Stiffened Panels

          Impact Location Identification of CFRP Structures Based on Radiated Sound

          Effect of Configurations of Mesh Tether in Space-Debris Impact

    2014

          Application of Absolute Nodal Coordinate Formulation of Flexible Multibody Dynamics to Aeroelastic Analysis of Flat Plate Wings

          Impact Damage Monitoring of Honeycomb Core Sandwich Panel Based on Impact Force Identification

          Correlation between Characteristics of Debris Cloud and Damage of Pressure Wall Caused by Space Debris Oblique Impacts

          Impact Damage Monitoring of Plates Using Radiated Sound

          Identification of Multiple Impact Forces Acting on Plates Using Measured Strain

          Self-Sufficient and Digitally-Controlled System for Vibration-Based Energy Harvesting using Piezoelectric Transduction

    2013

          Accuracy Improvement of Impact Force Identification Using Radiated Sound

          Energy Saving Vibration Control using Digital Processor

          Analysis of Collisions between Electro-Dynamic Tether and Space Debris

          Identification of Distributed Force on Plates Using Measured Strain

          Vibration Control of Plates Using Numerical Simulation

          Shape Control and Electric Wave Analysis of Deployable Antenna Using 1-D Model

    2012

          Damage Monitoring of FRP Composite Vessels Based on Impact Force Identification

          Adaptive Control for Multi-Modal Vibration System

          Development of an Efficient Piezoelectric Energy Harvester Using Impedance Matching Method

          Impact Force Identification of CFRP Stiffened Panels Using Radiated Sound

    2011

          Experimental Impact Force Identification of FRP Composite Tanks under Multiple Loadings

          Impact Force Identification of Plates Using Sound Waves

          Damage Detection in FRP Composite Vessel Using Ultrasonic Waves

          Semi-Active Vibration Control of CFRP Laminated Plates Using Piezoelectric Devices

    2010

         Self-sensing Semi-active Vibration Control using Piezoelectric Materials

         Non-power Structural Health Monitoring using Piezoelectric Energy Harvesting

         Impact Force Identification of Plates using Piezoelectric Materials

         Crack Detection in Aluminium Plates using Piezo-actuated Lamb Wave

         Vibration Control of Plates based on the Optimal Placement of Piezoelectric Fiber Actuator

    2009

         Strain Sensors Using CNT/Polymer Nanocomposites

         Rapid Impact Force Identification of Plate Structures

         Efficiency Increase of Damage Detection Techniques Based on Lamb Wave

         Vibration Control of CFRP Cantilever Beam Using Piezoelectric Energy-harvesting Technique

         Improvement of Interface Mechanical Properties for CFRP Composite Laminates by VGCF

    2008

         Vibration Control of CFRP Laminated Plate using Piezoelectric Fiber Actuators

         Damage Detection of CFRP Laminates by Lamb Wave

         Experimental Identification of Impact Force on Frame Structures

         Damage Monitoring of CFRP Plates by Impact Force Identification

         Vibration Measurement/Control of Plates with Consideration of Higher-order Mode Vibrations

    2007

         Impact Force Identification of CFRP Stiffened Panel under Multiple Loading

         Damage Detection of Structures by Lamb Wave Using Piezoelectric Transducer

         Energy Recycling Vibration Control using Piezoelectrics

         Vibration Control of CFRP Laminated Plate Using Piezoelectric Actuators and Sensors

         Panel Flutter Analysis of Delaminated Plates

         Evaluation of Electrical Conduction Characteristics in CNT/Polymer Composites

    2006

         Study of a Highly Accurate Method for Solving Inverse Problem of Impact Force Acting on CFRP Laminates

         Damage Detection in Aluminum Plate and Beam Using Lamb Wave

         Study of Low-velocity Impacts in Composite Laminated Plate

         Buckling Analysis of Carbon Nanotubes under Axial Compression

         Experimental Identification of Impact Force Location and History on CFRP Composite Structures

    2005

        Study of Impact Damage Monitoring Techniques on CFRP Laminates

        Vibration Control of CFRP Laminated Plate Using Highly Accurate Modal Sensor

    2004

        Flutter Suppression of Composite Plate Wings Focused on Twist Vibration Mode

        Study of High Accurate Identification of Impact Force Acting on Composite Structures

        Precise Measurement of Modal Displacement in Structural Vibration

    2003

        Static Shape Estimation of Truss Antennas Based on Strain Measurements

        Optimal Topology and Material Constitution of Composites Using A Homogenization Method

        Impact Force Identification of Laminated Plates Using PZT

        Measurement of Modal Displacement and Its Application to Impact Force Identification

    2002

        Optimum Design of Composite Wing Considering Stiffened Panel Buckling

        Stiffness Identification of Symmetric Laminates Using Vibration Data

        Impact Force Identification of Composite Structures Using Modal Sensor

    2001

        Delamination Identification of Composite Laminates Based on Vibration

        Optimum Design of Composite Plate Wings for Flutter Characteristics

        Actuator/Sensor Location for Static Shape Control of Truss Structures

        Vibration Control of Laminated Plates Using Modal Sensor/Piezoelectric Actuator

        Parameter Identification Using Vibration Characteristics Based on Experimental Design

    2000

        Damage Identification of Laminated Plates and Truss Structures Based on Dynamic Residual Forces

        Optimum Design of Lattice Cylindrical Shells under Axial Compression

Go back to the Top of This Page

Graduation Thesis

    2017

          Semi-Active Vibration Suppression Based on Preview Control Theory

          Damage Induced in Twisted Tape Tethers by Space Debris Impact

          Dynamic Analysis of a Beam Model Based on ANCF Using a Partitioning Method

          Damage Detection of Honeycomb Sandwich Beams Using the Visualization Technique of Ultrasonic Wave Propagation

          Study of a Self-Sensing Method for Self-Powered Vibration Energy Harvesting by Using a Differential Signal Measurement Circuit

    2016

          Development of a Circuit for Amplifying Electrical Energy in Piezoelectric Energy Harvesting

          Impact Force Identification of Isogrid-Stiffened Panels in a Noisy Environment Using the Radiated Sound

          Damage Monitoring of Aluminum Honeycomb Core Sandwich Panels

          Visualization of Impact Damages in CFRP Laminates Using Lamb Waves

          Dynamic Analysis of a Mutibody System Subjected to Fluid Force based on a Recursive Method

    2015

          Detection of Damages in Plates Using Lamb Waves

          Experiment on Space-Debris Impact on Aluminum Tether

          Evaluation of the Electric-Generating Performance of Vibration-Based Energy Harvester Based on the Bond Graph Theory

          Impact Location Identification Using the Direction of the Principal Strain

    2014

          Flutter Analysis of Flat Plates Using an Iterative Eigenvalue Algorithm

          Characterization of Debris Clouds Based on Video Imaging

          Damage Detection of CFRP Laminates Using Lamb Waves

          Multi-Body Dynamics Analysis of a 3D Rigid Pendulum Using Velocity Transformation

          Damage Identification of CFRP Honeycomb Sandwich Panels

    2013

          Evaluation of Dynamic Characteristics of a Mechanical-Electrical Vibration via Graphical Analysis Method

          Identification of Distributed Dynamic Force Acting on Plates

          Characteristics of Sound Radiation from Impacted Plates

          Evaluation of Dynamic Response of Truss Structure by Applying Impact Force

    2012

          Motional Simulation of Rigid Pendulums Using Multibody Dynamics

          Numerical Simulation of Penetration Holes Produced by Space Debris Using SPH Method

          Development of a Portable Energy Harvester with a Digital Control System

    2011

          Impact Force Identification of CFRP Structures Using Sound Waves

          Experimental Estimation of Dynamic Response of CFRP Laminated Plates

          Vibration Control of CFRP Beams Using SSDV

    2010

         Crack Identification of Plates using Lamb Wave

         Identification of Impact Force Location of CFRP Stiffened Panels using Lamb Wave

         Switch Timing in Semi-active Vibration Control

         Vibration Control of Cantilevered Plates based on Experimental Modal Analysis

    2009

         Sensor Location for Impact Force Identification of CFRP Laminates

         Experimental Identification of Impact Force Using Lamb Wave

         Experimental Identification of Impact Force of Composite Tank

         Visualization of Ultrasonic Wave Propagation and Its Application to Damage Detection

         Damage Detection of Plates Using Attenuation of Lamb Wave

    2008

         Identification of Multiple Impact Force Histories of CFRP Stiffened Panels

         Damage Detection of Plates using Lamb Wave

         Experimental Verification of Vibration Characteristics of Cantilevered Plates

    2007

         Evaluation of Electrical Conduction Characteristics in CNT/Epoxy Composites

         Passive Vibration Control using Piezoelectrics

         Damage Location of Aluminum Plates using Lamb Wave

        Impact Force Identification of CFRP Stiffened Panel using Piezoelectric Transducer

         Damage Detection by Lamb Wave based on Inverse Problem Solver

    2006

        Fundamental Study on Morphing Wing

        Propagation Properties of Lamb Wave in Beam

        Impact Force Identification of CFRP Stiffened Panel

        Effect of Actuator Location on Static Aeroelastic Control of Composite Plate Wings

    2005

        Impact Force Identification of Composite Structures Using Measurement Data

        Vibration Control of CFRP Laminated Plates Subjected to Impact Force

        Fundamental Study on Vibration Control Based on Stiffness Variation

        Analysis on Static Aeroelastic Deflection of Composite Plate Wings

        Impact Force Identification of CFRP Laminated Plates Based on Experimental Model

    2004

        Effect of Actuator Location on Vibration Control of CFRP Laminated Plates

        Experiment of Impact Force Identification of CFRP Laminated Plates with Embedded Piezoelectric Sensors

        Dynamic Characteristics of CFRP Laminated Cylindrical Shells

        Experiment of Vibration Control of CFRP Laminated Plates Based on LQR Control Law

    2003

        Optimal Location of Actuators for Shape Control of Truss Antenna Structures

        Experimental Verification of Modal Sensor Using Strain Data

        Optimization of 3-D Truss Structures for Vibration Characteristics

        Identification of Boundary Conditions Using Dynamic Responses

    2002

        Efficient Optimization of Truss Structures Using Nonlinear Programming Method

        Dynamic Response Analysis of Composite Plate Wings Subjected to Aerodynamic Force

        Impact Force Identification of Laminated Plates Using Strain Gauges

        Construction of Modal Sensor by Optimization of Sensor/Gain Distribution

    2001

        Actuator Location for Shape Control of Truss Structures

        Topology Optimization of 2-D Structures

        Piezoelectric Actuator Location for Vibration Control of Laminated Plates

    2000

        Damage Location of Truss Structures Based on Vibration Mode Expansion

        Parameter Identification Based on Frequency Response Functions

        Minimum Weight Design of Composite Delta-Wing Structures

        Stiffness Identification of Symmetrical Laminates Using Vibration Characteristics

    1999

        Study on Shape Control of Truss Structures

        Deployment/Retraction Characteristics of Two-Dimensional Deployable Truss Structures

        Topology Optimization of Truss Structures

        Aeroelastic Characteristics of Composite Box Beam Wing Structures

        Parameter Identification Using Response Surface Method

Go back to the Top of This Page


Go back to the Top Page of FUKUNAGA LAB.